1 n ne?? fxw connector 0.3mm pitch/connectors for fpc n ne?? emboss tape note: 1. tolerances are non-cumulative: 0.03mm for all centers. 2. the dimensions above should serve as a guideline. contact jst for details. ? ? ? ? ? ? ? ? ? # ? " ? ? ? this low-profile fpc connector with a mounting height of 1.0mm for normal type has a double zif flip-lock slider structure. specifications ?current rating: 0.2a ac, dc ?voltage rating: 50v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/100m ? max. after environmental testing/60m ? max. (variation from initial value) ?withstanding voltage: 200v ac/minute ?applicable fpc: conductor pitch/0.3mm <0.6mm pitch staggered> conductor width/0.3mm mating part thickness/0.12 0.03mm * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 ?low-profile (1.0mm height) & adoption of double zif structure one-touch sliding operation of molded cover ?heat resisting design suitable for surface mounting ?fpc with protrusions pc board layout (viewed from component side) and assembly layout
2 ? ? ? ? / ? / ? ? reinforcing layer ? ? ? ? / ? / ? / ? ? ? ? ? ? ? ? ? / ? ? reinforcing layer fxw connector n ne?? " $ # circuits model no. dimensions (mm) abc q'ty / reel 25 29 25fxw-sm1-g-s-tb 29fxw-sm1-g-s-tb 6.6 7.8 7.2 8.4 10.4 11.6 5,000 5,000 material and finish contact: copper alloy, nickel-undercoated, gold-plated housing: heat resisting resin, ul94v-0 solder tab: copper alloy, copper-undercoated, tin-plated (reflow treatment) cover: heat resisting resin, ul94v-0 rohs compliance this product displays (lf)(sn) on a label. straight type connector lead section dimensions of fpc note: n---number of circuits
|